Here are all the article 200’s in the code book for the NFPA.
Article 220 Branch-Circuit, Feeder, and Service Load Calculations part 3
220.60 Non-coincident Loads: Now here is an article that allows some concession to the end user for input on how we calculate loads. But when a person builds out a shop and they can only use one tool at a time then we need to make these concessions. Note this article allows for this to…
Article 220 Branch-Circuit, Feeder, and Service Load Calculations part 3 220.61
220.61 Feeder or Service Neutral Load. Let’s dissect this one shall we. To begin with the first part of this “A”. Ok here what we are going to do is we are going to say that a circuit is going to be 20 amps then we are going to run the 12 AWG load wire…
Article 220 Branch-Circuit, Feeder, and Service Load Calculations part 3 220.60
220.60 Non-coincident Loads: Now here is an article that allows some concession to the end user for input on how we calculate loads. But when a person builds out a shop and they only use one tool at a time then we need to make these concessions. Note this article allows for this to save…